emmegi group products technical support news and events contact us  
 
SEARCH MAP
home | emmegi group | products | technical support | news and events | contact us
characteristics | application | doors and windows | pvc properties | webmail
www.emmegi.com www.emmegisoft.com www.troncatrici.it www.mobilece.com www.quice.eu www.serramenticertificati.com

Benches

Indispensable equipments for assembly glass, frames and accessories.

Acca

Acca is a bench designed for the assembly of doors and windows. Its sliding and extendable work surfaces enable frames of all sizes and large styles in general to be handled under conditions of absolute safety.
 
 
 
 

Acca XL

Acca XL is a bench designed for the assembly of doors and windows. Its sliding and extendable work surfaces enable frames of all sizes and large styles in general to be handled under conditions of absolute safety.
 
 
 

Module Bench

Large size and extendible modular bench, for assembling of doors/windows and curtain wall frames. It features three distinct work surfaces: one of soft rubber for assembly operations, one of polyethylene for the rotation and a roller conveyor for the transportation of the workpiece along the assembly line.
 
 

Assembler

Assembler is a bench with three air-operated vices for the preassembly of hinges and gaskets.
 
 
 
 
 

Edge

Edge is a bench for the assembly of accessories and gaskets. It allows the frame to be turned in that it rotates about its centre and can be extended lengthwise.
 
 
 
 
 

Fit MA

Fit MA is an assembly bench for fitting perimeter band-sawed hardware on aluminium, wood and PVC sashes.
A system of drop-away clamps grips the sash. The bench is equipped with an automatically fed screwing unit.
 
 
 
 

Fit SRL

Fit SRL is an assembly bench for fitting perimeter band-sawed hardware on aluminium, wood and PVC glazed sashes. The sash is gripped with a drop-away clamping system and length of the hardware is measured automatically. The hardware is cut on the bench with a hydropneumatic shear. The bench is provided with an automatically fed screwing unit as well as a system for lifting and positioning the glazing plus a roller conveyor for installation in a line.
 
 
 

Fit

Fit is a bench designed for the assembly of sashes and frames. It is horizontal and features pneumatic changeover between the soft PVC contact surface (for the assembly phase) and the polyethylene contact surface (for the handling phase).
 
 
 
 
 

Fit T

Fit T is a bench designed for the assembly of sashes and frames. It features a work table which swings from 0° (horizontal) to 85° or 90°, with pneumatic changeover between the soft PVC contact surface (for the assembly phase) and the polyethylene contact surface (for the handling phase). The roller conveyor can be tilted manually and its height can be adjusted (from 170 to 460 mm) irrespective of the height of the work table.
 
 
 

Five CS

Five CS is a station for testing aluminium doors and windows. The door or window is tested by simulating its conditions of use: the frame is held in position by a set of adjustable clamps along the full height of the door or window, the sashes are placed inside the frame, followed by the glazing and final testing. The roller conveyor enables the operator to load and unload heavy doors and windows on his own.
 

BFG 2400

BFG 2400 is an assembly bench for fitting the aluminium frame with gasket and glazing. The glazing is lifted with a spider clamp and thanks to a system of selfaligning clamps the frames are pressed two-by-two. After pressing on the first two sides, the spider clamp is rotated, then it is possible to press on the other two sides.

DOWNLOAD DATASHEET
 
 

BMF 3400

BMF 3400 is an assembly bench designed for fitting hardware. The generous work table allows handling large sashes or frames while the three coverings available (polyethylene for aluminium, brush covered for PVC, felt for wood) allow working any type of window/door.
It measures the hardware, cuts it with a hydro-pneumatic shear and performs the screwing with an automatically fed screwing unit.
Instead, on request, the bench can be provided with 3-spindle drilling unit for cremone bolts, milling unit for cremone bolts, drilling unit for hinge holes, swarf drawer, hardware rack, accessory shelf and automatic glazing bead measuring system with magnetic sensors.  
 

Frame

Frame is a station for assembling and testing aluminium and PVC frames. A fullheight drop-away system locks the frame in position so that the sashes and glass can be assembled. The window or door is tested by simulating its conditions of use. The roller conveyor at the base of the station makes heavy or bulky doors and windows easier to handle and assemble.
 
 
 
 
 

Link

Link is a roller conveyor that links the assembly stations and carries frames, including very heavy ones, from one to another with the greatest of ease.
 
 
 
 
 

BA 411

Assembly bench for glazed sashes with work table tilting from 0° (horizontal) to 85°.
The drop-away roller conveyor is adjustable in height (from 170 to 460 mm) independently from the work table. The work table is adjustable from 895 to 965 mm while the feet are drilled with holes for floor anchoring. The bench is provided with a central spider clamp for hoisting and positioning the glass.
 
 
 
 

BSA 411

Assembly bench for glazed sashes with work table tilting from 0° (horizontal) to 85°. The drop-away roller conveyor is adjustable in height (from 170 to 460 mm) independently from the work table. The work table is adjustable from 895 to 965 mm while the feet are drilled with holes for floor anchoring. The bench is provided with a central spider clamp for hoisting and positioning the glass. Designed for Syncro ® accessories.