electronic twin-head cutting-off machine for compound cut
Market: The market for this type of machines still offers solutions with traditional architecture, local protections and a standard level of safety. Compound Cut addresses the market of twin-head cutting-off machines by proposing a high-performance 9-axis solution, unique in its kind, highly innovative, equipped with advanced electronics and offering very high safety levels. Compound Cut is a cutting-edge proposal.
Emmegi range: Compound Cut is the result of the restyling and upgrading process of the twin-head cutting-off machine for combined cutting which is currently on the market.
|01> The inclination of each head, up to 22°30’ outwards, is obtained by means of a mechanical transmission with high- precision gear motor and brushless motor with absolute encoder. The tilting is performed by means of an electric actuator with recirculating ball screw and brushless motor. To ensure an optimal positioning, the positioning accuracy is checked upstream of the kinematic transmission chain, through a rotary absolute encoder.
|01› COMBINED CUT
|02> The blade feed is carried out on two axes. The vertical translation, associated with the blade exit movement, increases the cutting chart height dimension significantly, allowing for maximum use of the large diameter of the blade. The tool trajectory is managed by the software based on the cutting program, on the profile and on the head inclination.
|02› BLADE FEED ON 2 AXES
|03> The machine is equipped with a system with clamps that swings horizontally and, by means of horizontal hold- down devices, clamps the profile for an extremely precise cut.For vertical clamping, particularly for special cuts, the machine can be equipped with a patented system of horizontal hold- down devices.
Compound Cut is equipped with a roller conveyor on the mobile head, for standard loading and unloading and intermediate pneumatic supports of the bar.
|03› PROFILE CLAMPING
|04> The ergonomic state-of- the-art control panel features a 10.4” touchscreen display and fully customised software and is packed with functions developed in the Microsoft Windows® environment specifically for this machine.The machining cycle can be optimised by creating cutting lists, thereby reducing scrap and cycle times for parts loading- unloading.
|05› HS – HIGH SPEED
|05> The HS – High Speed version is equipped with a faster X axis (mobile head positioning), and features an integral protection on the sides and at the back, to operate in complete safety, increasing productivity.The safety characteristics of this version, fully inaccessible during operation, allow using automatic cutting cycles, even not supervised, at maximum operational performance.
H 300 x B 210
H 230 x B 210
H 500 x B 50
Twin-head cutting-off machine with 9 controlled axes which include the automatic movement of the mobile head, electronic management of two rotation axes of the cutting units, blade feed and vertical translation of the cutting units to maximise the work area. It allows reaching angles from 45° (internally) to 22°30’ (externally) on horizontal axis and from 0 to 45° on vertical axis with decimal cutting precision. The feed of 600 mm widia blades can be carried out on two axes, optimising the cutting chart in the vertical direction, to cut profiles more than 500 mm in height and ensure an optimal adjustment of blade exit speed and stroke. The HS (High Speed) version has a higher speed X axis and all the protections required for automatic machining operations, also with the machine unattended.