MOD-END HINGE

MOD-END HINGE is a drilling machine which bores hinge holes on frames with an electronically-controlled axis. It is supplied with two multi-spindle drilling units to bore holes on aluminium, aluminium/wood hinges with relative internal reinforcement. The electronic positioning of the drilling units and the possibility of working with only the master unit allows you to drill holes for three or more hinges in variable positions, including asymmetric. When properly configured, it can execute fixing holes on walls by means of an optional horizontal unit on all types of L-shaped and Z-shaped frames.

Technical data arrow_drop_down
FUNCTIONS 
Manual frame positioning  
 
Positioning of corner hinges with manual presetting 
 
NC machining of multiple hinges 
 
WORKPIECE LOCKING 
Pneumatic frame locking system with longitudinal hold-down device 
 
Workpiece reference stop near the machining unit 
 
Maximum profile locking dimension (mm) 
90 
Maximum machinable square dimension - inner measurement (mm) 
2.500 x 2.500 
Minimum machinable square dimension - inner measurement (mm) 
400 
Minimum machinable square size with wall-fixing drilling unit - inner measurement (mm) 
510 
Minimum profile height (mm) 
40 
Maximum profile height (mm) 
90 
Max. machinable profile width (mm) 
130 
CHARACTERISTICS 
Number of controlled axes 
Internal frame reference 
 
X axis stroke – master unit (mm) 
3500 
X axis speed (m/min) 
20 
Max. air consumption (Nl/min) 
50 
Installed power (kW) 
5.9 
Installed power - with optional unit (kW) 
7.6 
Max. frame weight (kg/m) 
WORK BENCHES 
Contact surfaces covered with brushes 
 
Soft PVC retractable bench for manual machining on the frame  
 
Work surface height (mm) 
950 
DOUBLE DRILLING UNIT WITH MULTI-SPINDLE UNIT 
Maximum power in S1 (kW) 
1.7 
Maximum speed (rpm) 
2880 
Socket toolholder with locking grub screws 
 
Max. tool diameter (mm) 
Number of machinable sides 
AUTOMATIC DRILLING UNIT FOR WALL MOUNTING 
Maximum power in S1 (kW) 
1.7 
Maximum speed (rpm) 
6000 
Toolholder 
ER20 
Max. tool diameter (mm) 
15 
Number of machinable sides 
Max. machinable depth (mm) 
80 
Included       
Avayable
CN double drilling unit
The drilling position of hinges is set manually, allowing one or more hinge types to be positioned very easily. Machining units equipped with multi-spindles perform extremely precise drilling of corner hinges, guaranteeing their position on the frame.
MOD-END HINGE CN double drilling unit Emmegi
MOD-END HINGE Wide supporting surface Emmegi
Wide supporting surface
The work bench is very wide and customisable to allow the translation of even large formats. Upon request it is equipped with pneumatic bench exchange to enable on the same bench also the assembly of windows.
Control
The ergonomic state-of-the-art control panel features a 10.4” touchscreen display and fully customised software and is packed with functions developed in the Microsoft Windows® environment specifically for this machine. The machining cycle can be optimised by creating cutting lists, thereby reducing scrap and cycle times for workpieces loading-unloading.
MOD-END HINGE Control Emmegi
MOD-END HINGE Hinge management Emmegi
Hinge management
Extremely simple software control allows the operating units to be managed separately. This makes it possible to handle multiple drilling of hinges without positioning constraints.
Drilling holes for wall mounting

A suitably sized optional aggregate, equipped with a floating gripper system, also allows the execution of wall-fixing holes on aluminium, aluminium/wood and PVC profiles to be included in the machining cycle.

MOD-END HINGE Drilling holes for wall mounting Emmegi

Other Products