Horizontal end milling machine with manual feed. Milling of intermediate angles, +45° / 90° / -45°. Quick cutter change with pneumatic control. Scratch-proof work table. Fully guarded work zone.

Technical data arrow_drop_down
CHARACTERISTICS 
Brake motor (kW)
1,1
Tool speed (rpm)
2.800
Stroke (mm)
300
Vice capacity (mm)
200 x 120
Horizontal and vertical pneumatic vices with low pressure device
 
6-position positive indexing stop
 
Cutter holder sleeve (mm)
Ø = 27 / 32 x 135
Max mill (mm)
Ø = 160
Micro-mist lubrication system with water and oil emulsion
 
Base with mill holder magazine and swarf conveyor
 
Compressed air gun for cleaning
 
Included       
Available
Vice group and out-of-square
Both horizontal and vertical vices are pneumatically operated with a low-pressure device. Out-of-square is managed with the ability to vary the tilt from -45° to +45° with manual handling. The position is read by graduated scale.
Products for Aluminium LILLIPUT 300 M Vice group and out-of-square Emmegi
Products for Aluminium LILLIPUT 300 M Rapid pneumatic change Emmegi
Rapid pneumatic change
Changing the mill assembly is done pneumatically via the control located in the control panel. This allows the mill assembly housed in the machine to be varied and ensuring the machinability of different extrusions.
Positive indexing stop
The manual 6-position positive indexing stop enables 6 measurements to be set so that the workpiece can be positioned quickly, thus reducing the time of the work cycle. It is also possible to manually adjust the height of the positive indexing stop.
Products for Aluminium LILLIPUT 300 M Positive indexing stop Emmegi
Products for Aluminium LILLIPUT 300 M Tool magazine Emmegi
Tool magazine
The machine base houses the milling cutter magazine, which is easily accessible in manual picking operations, allowing the cutter assemblies to be housed in neat positions and preserving their integrity.
Control
The push-button panel on the machine control panel allows the management of: air blowing for cleaning the vice table, startup with safety switch, quick tool change.
Products for Aluminium LILLIPUT 300 M Control Emmegi
Products for Aluminium LILLIPUT 300 M Profile support roller conveyor Emmegi
Profile support roller conveyor (Optional)
Enables correct positioning in the machine and secure support of the profile in the machining area. Slide rollers make profile handling operations easier.

Other Products