LILLIPUT  320 M

Horizontal end milling machine with manual feed. Milling of intermediate angles, +45° / 90° / -45°. High speed of tool rotation for improved quality machining on painted profiles and at intermediate angles. Quick cutter change with pneumatic control. Scratch-proof work table. Fully guarded work zone with high internal visibility

Technical data arrow_drop_down
CHARACTERISTICS 
Brake motor (kW)
1,5
Tool speed (rpm)
6.000
Stroke (mm)
320
Vice capacity (mm)
200 x 120
Horizontal and vertical pneumatic vices with low pressure device
 
6-position positive indexing stop
 
Cutter holder sleeve (mm)
Ø = 27 / 32 x 160
Max mill (mm)
Ø = 180
Micro-mist lubrication system with water and oil emulsion
 
Preparation for smoke extraction connection
 
Base with mill holder magazine and swarf collection drawer
 
Profile support roller conveyor, length (mm)
500
Vice bench cleaning air blower
 
Compressed air gun for cleaning
 
Included       
Available
Swarf collection
A drawer located at the bottom of the machine allows the collection of swarfs generated during machining, facilitating cleaning operations.
Products for PVC LILLIPUT 320 M Swarf collection Emmegi
Products for PVC LILLIPUT 320 M Vice group and out-of-square Emmegi
Vice group and out-of-square
Both horizontal and vertical vices are pneumatically operated with a low-pressure device. Out-of-square is managed with the ability to vary the tilt from -45° to +45° with manual handling. The position is read by graduated scale.
Rapid pneumatic change
Changing the mill assembly is done pneumatically via the control located in the control panel. This allows the mill assembly housed in the machine to be varied and ensuring the machinability of different extrusions.
Products for PVC LILLIPUT 320 M Rapid pneumatic change Emmegi
Products for PVC LILLIPUT 320 M Positive indexing stop Emmegi
Positive indexing stop
The manual 6-position positive indexing stop enables 6 measurements to be set so that the workpiece can be positioned quickly, thus reducing the time of the work cycle. It is also possible to manually adjust the height of the positive indexing stop.
Profile support roller conveyor
Enables correct positioning in the machine and secure support of the profile in the machining area. Slide rollers make profile handling operations easier.
Products for PVC LILLIPUT 320 M Profile support roller conveyor Emmegi
Products for PVC LILLIPUT 320 M Control Emmegi
Control
The push-button panel on the machine control panel allows the management of: air blowing for cleaning the vice table, startup with safety switch, quick tool change.

Other Products