Manually controlled single head copy router with pneumatic clamping and traverse of the head with indirect lever. Tool rotation speed editable with electronic inverter to allow the machining of steel up to 2 mm, and to improve the quality of milling and tool life. Ability to run through machining of aluminum without turning the workpiece. Scratch-proof. Pneumatic stylus with control on the handle.

Technical data arrow_drop_down
CHARACTERISTICS 
Motor with inverter (kW) 
1.1 
Tool speed (rpm) 
1.000 ÷ 10.000 
Vice capacity (mm) 
200 x 200 
Toolholder with gripper 
ER 16 
Injection lubrication system 
 
Micro-mist lubrication system with water and oil emulsion 
 
Travel (X-Y-Z) (mm) 
380 – 150 – 250 
Rapid tool change 
ISO 30 
Max. tool diameter (mm) 
10 
Max. tool length (mm) 
95 
Pair of horizontal vices 
 
Pair of vertical vices 
 
Pair of vertical vices on side brackets 
 
Adjustable vice jaws 
 
One tooth end-mill (mm) 
Ø = 5 - 10 
Mill-holder collet complete with lock-nut (mm) 
Ø = 5/6 – 9/10 
Indirect head translation lever 
 
4-diameter sensor 
Ø = 5 - 6 - 8 - 10 
Tool speed adjustment potentiometer 
 
Air cooling system –20° and injection lubrication with 1 nozzle for machining on stainless steel 
 
Laser pointer 
 
Template with standard figures 
 
Right and Left profile-supporting shelves with 4 excludable stops 
 
Central stop that slides along linear guides 
 
Tool holder storage built into the base, holds 4 tools 
 
Head movement along precision linear guides 
 
Stop devices along the travel of axes X, Y, Z, with precision metric rod 
 
Included       
Avayable
Indirect head translation lever
The tool travels along the horizontal plane manually using a lever that minimises the strength required by the operator. The height of the handle is adjustable for a practical and ergonomic use.
Products for Steel Copia 384 Indirect head translation lever Emmegi
Products for Steel Copia 384 Vices Emmegi
Vices
The machine has manually adjustable pneumatically controlled horizontal vices that guarantee the profile is correctly clamped in the machine. For better profiles clamping when required, a couple of vertical pneumatic vices is available as an optional.
Control joystick
The lever allows performing the vertical movement of the milling unit. A motor starter button is found on the joystick. The electrospindle has a tool holder with an ISO 30 quick coupling; there are 4 housings on the sides of the machine for 4 toolholders.
Products for Steel Copia 384 Control joystick Emmegi
Products for Steel Copia 384 Control with inverter Emmegi
Control with inverter
The control panel allows the machine to be activated, the motor to be switched on and the vices to be opened and closed. The presence of the inverter allows the revs of the motor to be changed by means of a potentiometer on the console, thereby making the machine suitable for steel processing. An optional air-cooling system at - 20°C allows stainless steel to be processed up to a thickness of 2 mm.

Other Products