Double head cutting-off machine with manual movement of the mobile head and parameter reading through digital display screen. Outward pneumatic tilting of the head up to 45° or 22°30’ depending on the model. 450 and 500 mm-blade. Available with a useful cut of 4, 5, 6 m in length.

Technical data arrow_drop_down
MACHINE CHARACTERISTICS  
Mobile head position reading with magnetic strip direct measuring system
 
Cutting capacity (mm)
4.000 / 5.000 / 6.000
Metric ruler
 
Pair of standard counterblocks
 
Pre-setting for automatic exhauster start
 
Manual profile support
 
Water spray-mist lubrication system with oil emulsion or minimal diffusion oil spray-mist (depending on version)
 
Profile support roller conveyor
 
Pair of horizontal and vertical pneumatic vices with "low pressure" device
 
Cutting area pneumatically-controlled integral protection
 
Blade motor power (kW)
2.2
Cemented carbide blade
2
COMMAND FEATURES 
Storage of 10 cutting lists (50 rows each) from keyboard
 
Storage of 99 profile corrective values with measurement automatic calculation for angled cuts
 
Perform single cuts
 
LCD value display
 
CUTTING DIAGRAM 
Included       
Avayable
Digital viewer for intermediate angles

In the presence of pneumatic tilting of the moving heads, the intermediate angle viewer allows the tilting of the cutting unit to be identified with absolute precision, ensuring the accuracy of the cut profiles. Especially useful in making out-of-square cuts, it allows the operator to quickly and accurately identify the required angle.

Double-head cutting-off machines Classic VIS Digital viewer for intermediate angles Emmegi
Double-head cutting-off machines Classic VIS X axis digital viewer  Emmegi
X axis digital viewer
The positioning dimension of the moving head along the X-axis is displayed electronically by digital display, which provides an immediate readout of the set length and ensures accuracy in the cutting phase.
Mobile heads tilting
Rotation of the heads around the horizontal axis is performed via pneumatic cylinders. The angles that can be obtained are from 90° to 45° outside for machines equipped with 450 mm diameter blades. With 500 mm diameter blades, angles from 90° to 22°30' outside can be achieved. Intermediate angles are obtained by means of a special stop that can be manually adjusted. Mobile units are equipped with integral pneumatic drop-down protections of the machining area.
Double-head cutting-off machines Classic VIS Mobile heads tilting Emmegi
Double-head cutting-off machines Classic VIS Push-button panel Emmegi
Push-button panel
The push-button panel installed in the various models, sliding on bearings, facilitates the use of the machine as it allows it to be always positioned close to the cutting unit.
Mobile unit positioning
Positioning of the mobile unit is done manually by turning the handwheel; the position is detected by means of a magnetic strip and the PLC-type LCD display shows the height at which the moving head is positioned.
Double-head cutting-off machines Classic VIS Mobile unit positioning Emmegi

Other Products