The Emmegi twin-head cutting-off machines boast of exceptional performance characteristics, including ruggedness and reliability. This machine is the ideal tool for cutting aluminium and PVC bars in various thicknesses and at different angles. Latest generation machines which can make a considerable contribution to the production cycle thanks to their high standard of accuracy and user-friendliness. Radial Libra is an electronic twin-head cutting-off machine with radial movement of the blades, automatic traversing of the moving cutting head and tilting inwards up to 30°. It is designed for cutting large profiles. The machine can be provided with an industrial label printer to enable profile identification and association with relative job.

Technical data arrow_drop_down
6" graphic LCD display
Preparation for label printer connection
Label printer with a speed of 150 mm/sec
Label printer with peeling device with a speed of 150 mm/sec
USB port
RJ45 network card
Presetting for connection with remote PC via USB, network or serial (depending on version)
Perform single cuts
Storage of 99 profile corrective values with measurement automatic calculation for angled cuts
Storage of 20 cutting lists (50 rows each) from keyboard
Storage of 25 cutting lists (100 rows each) via cable from an external PC using a USB
Creation of 100 door/window types (1500 formulas) downloadable to USB
Mobile head position reading with magnetic strip direct measuring system
Cemented carbide blade
Cutting area pneumatically-controlled integral protection
Pair of horizontal and vertical pneumatic vices with "low pressure" device
Profile support roller conveyor
Water spray-mist lubrication system with oil emulsion or minimal diffusion oil spray-mist (depending on version)
Manual profile support
Pre-setting for automatic exhauster start
Metric ruler
Cutting capacity (mm)
4.000 / 6.000
Blade motor power (kW)
Label printer

The industrial label printer allows each cut profile to be identified with identifying features from the cutting list. In addition, barcode printing enables easy identification of the profile itself, which is particularly useful for subsequent machining steps on Machining Centres or assisted assembly lines.

Double-head cutting-off machines Radial Libra Label printer Emmegi
Double-head cutting-off machines Radial Libra Digital viewer for intermediate angles Emmegi
Digital viewer for intermediate angles

In the presence of pneumatic tilting of the moving heads, the intermediate angle viewer allows the tilting of the cutting unit to be identified with absolute precision, ensuring the accuracy of the cut profiles. Especially useful in making out-of-square cuts, it allows the operator to quickly and accurately identify the required angle.

Pneumatic intermediate support

The pneumatic intermediate support is extremely useful when cutting light profiles of considerable lengths. In this case, the pneumatic support will, automatically, provide the ideal condition to support the profile. This accessory is available for all lengths, but is specifically recommended on machines having 5- and 6-meter useful cuts.

Double-head cutting-off machines Radial Libra Pneumatic intermediate support Emmegi
Double-head cutting-off machines Radial Libra Mobile heads tilting Emmegi
Mobile heads tilting
The blade holder assembly, located on each of the movable heads, can be positioned by pneumatic cylinders, relative to the profile support plane of the profile, at 90°, 45°, 30° and at intermediate inward angles. Mobile units are equipped with integral pneumatic drop-down protections of the machining area.
The control installed on the various models, designed for ease of use and sliding on bearings, allows correct positioning of the moving heads according to the specifications of the cut to be made. The machining cycle can be optimised by creating cutting lists, thereby reducing scrap and cycle times for workpieces loading-unloading.
Double-head cutting-off machines Radial Libra Control Emmegi

Other Products