5-axis CNC machining centre used for the working of bars or aluminium, PVC, light alloys in general and steel pieces. It is provided with two operating modes: a single work area for bars up to 7 m length or two independent work areas in swing mode. The machine in HP version is equipped with 2 additional axes for positioning of vices and reference stops, that allow positioning the vices while the machine is working in swing mode. The 4th and 5th axis allow the electric spindle to continuously rotate to NC from -15° to 90° on horizontal axis and from 0° to 720° on continuous vertical axis, to perform the work on the upper side and on all the lateral sides of the profile. It is provided with a 12-place tools magazine, on the X axis gantry, able to host also one milling disc. It also has a mobile work surface that facilitates the piece loading/unloading operation and significantly increases the workable section.

Technical data arrow_drop_down
AXIS STROKES 
X AXIS (longitudinal) (mm) 
7660 
Y AXIS (transversal) (mm) 
1000 
Z AXIS (vertical) (mm) 
450 
H AXIS (vice position.) 
3.300 
P AXIS (vice position.) 
3.300 
B axis (rotation on electrospindle horizontal axis) 
-15° ÷ +90° 
C AXIS (rotation on electrospindle vertical axis) 
-360° ÷ +360° 
ELECTROSPINDLE 
Maximum power in S1 (kW) 
8.5 
Maximum power in S6 (60%) (kW) 
10 
Maximum speed (rpm) 
24000 
Toolholder cone 
HSK - 63F 
Automatic tool holder coupling 
 
Cooling with heat exchanger 
 
Electrospindle controlled on 5 axes with the possibility of simultaneous interpolation 
 
AUTOMATIC TOOL MAGAZINE ON BOARD THE GANTRY 
Maximum number of magazine tools 
12 
Maximum length of the tool that can be loaded into the magazine (mm) 
190 
Maximum diameter of the blade that can be inserted in the magazine (mm) 
Ø = 250 
Magazine places occupied by blade tool 
WORK AREA 
TAPPING CAPACITY (with tap on aluminium and through hole) 
Stiff (optional) 
M10 
With compensator 
M8 
FUNCTIONS 
Dynamic double operation 
 
Multi-piece operation 
 
Basic multi-step machining - up to 5 steps 
 
Automatic management of multi-step mode machining 
 
Extended machining, up to twice the maximum nominal length in X 
 
Multi-piece mode machining in Y 
 
Workpiece rotation for machining on 4 sides 
 
WORKPIECE LOCKING 
Standard number of vices  
Maximum number of vices 
12 
Maximum number of vices per area 
Automatic vice positioning through X axis 
 
Automatic vice positioning and workpiece reference stops through independent H and P axes 
 
Included       
Avayable
Glass protection
Safe, perfect, resistant, long-lasting. These are the advantages of choosing glass for protecting the new Comet machining centres. Glass is also easy to clean and less susceptible to scratches and wear. Machine cuts operate to flag machine statuses, thanks to a light colour interface. The whole visor slides downwards, thus making it easier to load the workpieces; additionally, the ends feature aluminium guards that act as a support plane if needed.
Products for Steel Comet R6 HP Vice positioner Emmegi
Vice positioner
Vice unit positioning is performed by two numerically controlled axes, H and P, parallel to the X-axis, with on-board reference stop. This solution allows positioning stops all along the machine to work in multi-workpiece mode with one profile for every pair of vices. Furthermore, the positioning of the vices takes place independently of the operational condition of the spindle (X-axis).
Label printer

The industrial label printer allows each cut profile to be identified with identifying features from the cutting list. In addition, barcode printing enables easy identification of the profile itself, which is particularly useful for subsequent machining steps on Machining Centres or assisted assembly lines.

Products for Steel Comet R6 HP Label printer Emmegi
Products for Steel Comet R6 HP Tool magazine Emmegi
Tool magazine
The tool magazine is integrated on the X axis, in the lower part and behind the electrospindle. It allows great reduction of tool change times. This function is particularly useful in the extrusion head and tail machining, avoiding the stroke to get to the magazine, as it moves simultaneously with the electrospindle and its positions. The magazine can contain up to 12 toolholders with relevant tools, including a blade with a maximum diameter of 250 mm, which can be set at the operator’s discretion. Each position of the tool holder is provided with a sensor detecting the correct cone position.
Operator interface
The possibility of rotating the monitor on its vertical axis allows the operator to view the screen from any position. The user interface has a 24” touchscreen display in 16:9 format, portrait mode, equipped with the necessary USB connections for PC and CNC remote interfaces. It also features an operator panel, mouse, and it is set up for connecting barcode reader and remote operator panel.
Products for Steel Comet R6 HP 5 axes electric head -R- Emmegi
5 axes electric head -R-
8.5 kW S1 high torque electrospindle also allows heavy duty machining, which is typical in industrial processing. As an option and for higher performances a 10.5 kW encoder equipped electrospindle is available for rigid tapping. Electrospindle rotation along B and C axes allows working on 5 sides of the profile, with no need of repositioning. It can be used for some types of steel extrusions as well as for aluminium profiles, thanks to the software-adjusted lubricating system. With its double tank it allows either minimum oil circulation or oil emulsion spray-mist.
Foldaway tunnel
Integrated with the machine’s aesthetics and design, thanks to the perforated sheet metal for transparency and lightness, the tunnel opens and closes as needed. As its length can be reduced when not in use, it helps save space at the workshop. The outlet for the chip conveyor belt and its engine are built into the lower section, in view of an aesthetic and functional design.
Products for Steel Comet R6 HP Foldaway tunnel Emmegi
HP version
Comet has two operation modes: a single work area for bars up to 7 m long, or two independent work areas in double operation mode. The machine in HP version is equipped with 2 additional axes for positioning of vices and reference stops, that allow positioning the vices while the machine is working in double mode.
Dynamic double operation
The innovative machining mode allows minimising downtimes when loading and unloading the workpieces to be machined. The system allows, in the two distinct and independent work areas, to simultaneously carry out the loading/unloading of extruded profiles on one side, and machining of workpieces on the other, with different lengths and/or codes. This solution makes the machine very flexible, which is highly suitable for the field of window/door frames and for small work orders, where machining is required for small lots of different pieces.
Products for Steel Comet R6 HP Dynamic double operation Emmegi

Other Products