4-axis CNC machining centre designed for working bars or parts in aluminium, PVC, light alloys in general and steel. It is equipped with two operating modes: a single work area for bars up to 7 m length or two independent work areas in double mode. The machine is equipped with independent motorized vices that allow positioning the vices in concurrent operation time during the operation in dynamic pendular mode. The 4th axis allows the electrospindle to continuously rotate to NC from -120° to +120° on horizontal axis, to perform the work on the upper side and on all the lateral sides of the profile. It is equipped with a 10-place tool magazine, on the X axis gantry, able to host also one milling disc. It also has a mobile work table that facilitates the workpiece loading/unloading operation and significantly increases the workable section.

Technical data arrow_drop_down
AXIS STROKES 
X AXIS (longitudinal) (mm)
7340
Y AXIS (transversal) (mm)
1000
Z AXIS (vertical) (mm)
450
A AXIS (rotation on electrospindle horizontal axis)
-120° ÷ +120°
ELECTROSPINDLE 
Maximum power in S1 (kW)
8.5
Maximum power in S6 (60%) (kW)
10
Maximum speed (rpm)
24000
Toolholder cone
HSK - 63F
Automatic tool holder coupling
 
Cooling with heat exchanger
 
Electrospindle controlled on 4 axes with the possibility of simultaneous interpolation
 
AUTOMATIC TOOL MAGAZINE ON BOARD THE GANTRY 
Maximum number of magazine tools
12
Maximum diameter of the blade that can be inserted in the magazine (mm)
Ø = 250
TAPPING CAPACITY (with tap on aluminium and through hole) 
With compensator
M8
Stiff (optional)
M10
FUNCTIONS 
Dynamic double operation
 
Multi-piece operation
 
Basic multi-step machining - up to 5 steps
 
Automatic management of multi-step mode machining
 
Extended machining, up to twice the maximum nominal length in X
 
Multi-piece mode machining in Y
 
Workpiece rotation for machining on 4 sides
 
WORKPIECE LOCKING 
Maximum number of pneumatic vices
12
Standard number of pneumatic vices
8
Independent motorised vices
 
Maximum number of vices per area
6
WORK AREA 
Included       
Avayable
Glass protection
Safe, perfect, resistant, long-lasting. These are the advantages of choosing glass for protecting the new Comet machining centres. Glass is also easy to clean and less susceptible to scratches and wear. Machine cuts operate to flag machine statuses, thanks to a light colour interface. The whole visor slides downwards, thus making it easier to load the workpieces; additionally, the ends feature aluminium guards that act as a support plane if needed.
Products for Steel Comet S6 I 4 axes electric head -S- Emmegi
4 axes electric head -S-
The 8.5 kW electrospindle in S1 with high torque also enables performing the heavy machining typical of the industrial sector. A 10.5 kW electrospindle with encoder for rigid tapping is available as optional. Electrospindle rotation along A axis allows working on 3 sides of the profile, with no need of repositioning. Normally used for machining extruded aluminium profiles, it also enables machining steel profiles thanks to the twin tank lubrication system: one with minimal oil diffusion, and the other with oil emulsion spray.
Motorized vices
The motorized vices, each equipped with its own motor, can be positioned independently in the work area. The CNC manages the movement of vices and that of electrospindle head simultaneously, in the two different work areas in double operation mode. This enables significant productivity gains. Using absolute reference axes allows reducing the initialisation time required every time the machine is restarted.
Products for Steel Comet S6 I Motorized vices Emmegi
Products for Steel Comet S6 I Label printer Emmegi
Label printer

The industrial label printer allows each cut profile to be identified with identifying features from the cutting list. In addition, barcode printing enables easy identification of the profile itself, which is particularly useful for subsequent machining steps on Machining Centres or assisted assembly lines.

Tool magazine
The tool magazine is integrated on the X axis, in the lower part and behind the electrospindle. It allows great reduction of tool change times. This function is particularly useful in the extrusion head and tail machining, avoiding the stroke to get to the magazine, as it moves simultaneously with the electrospindle and its positions. The magazine can contain up to 10 tool holders with relevant tools, which can be set at the operator’s discretion. Each position of the tool holder is provided with a sensor detecting the correct cone position.
Products for Steel Comet S6 I Tool magazine Emmegi
Operator interface
The possibility of rotating the monitor on its vertical axis allows the operator to view the screen from any position. The user interface has a 24” touchscreen display in 16:9 format, portrait mode, equipped with the necessary USB connections for PC and CNC remote interfaces. It also features an operator panel, mouse, and it is set up for connecting barcode reader and remote operator panel.
Foldaway tunnel
Integrated with the machine’s aesthetics and design, thanks to the perforated sheet metal for transparency and lightness, the tunnel opens and closes as needed. As its length can be reduced when not in use, it helps save space at the workshop. The outlet for the chip conveyor belt and its engine are built into the lower section, in view of an aesthetic and functional design.
Products for Steel Comet S6 I Foldaway tunnel Emmegi
Products for Steel Comet S6 I Dynamic double operation Emmegi
Dynamic double operation
The innovative machining mode allows minimising downtimes when loading and unloading the workpieces to be machined. The system allows, in the two distinct and independent work areas, to simultaneously carry out the loading/unloading of extruded profiles on one side, and machining of workpieces on the other, with different lengths and/or codes. This solution makes the machine very flexible, which is highly suitable for the field of window/door frames and for small work orders, where machining is required for small lots of different pieces.

Other Products