Comet X6 HP

home / product categories / CNC machining centres

4-axis CNC machining centre designed for working bars or parts in aluminium, PVC, light alloys in general and steel up to 2 mm. The machine can operate in single-piece and multi-piece mode, with a single work area for bars up to 7 m in length. The COMET X6 HP version allows working in pendular mode, with two independent work areas and 2 supplementary axes to position the vices and the reference stops; it allows operation in dynamic pendular mode, carrying out vice positioning in concurrent operation time. Each model has a 10-place tool magazine, on the X axis gantry, with the possibility of hosting an angle machining head and a milling disc, to perform machining on the 5 sides of the workpiece. The 4th NC axis allows the electrospindle to rotate from 0° to 180° and position itself at any intermediate angle. The machine can therefore perform machining operations on the top and side faces of the profile at any angle within the range. It also has a mobile work table that facilitates the workpiece loading/unloading operation and significantly increases the workable section.

Estimate Request

Technical data

AXIS STROKES

X AXIS (longitudinal) (mm)

7.970

X AXIS (longitudinal) (dynamic double operation) (mm)

7.600

Y AXIS (transversal) (mm)

420

Z AXIS (vertical) (mm)

430

A AXIS (electrospindle rotation)

0° ÷ +180°

H AXIS (vice position.)

3.900

P AXIS (vice position.)

3.900

ELECTROSPINDLE

Maximum power in S1 (kW)

Maximum speed (rpm)

16.500

Toolholder cone

HSK - 50F

Automatic tool holder coupling

Cooling with heat exchanger

Electrospindle with encoder for rigid tapping

FUNCTIONS

Multi-piece operation

Static double operation (according to model)

Dynamic double operation

Extended machining, up to twice the maximum nominal length in X

Basic multi-step machining - up to 5 steps

Automatic management of multi-step mode machining

Multi-piece mode machining in Y

Workpiece rotation for machining on 4 sides

WORKABLE SIDES

With direct tool (upper face and side faces)

With angle machining head (heads)

With blade tool (upper face, side faces and heads)

1 + 2 + 2

WORK AREA

1F = 1 face machining 5F = 5 faces machining

		A	B	C	D	X1	Y1	Z1	X2	Y2	Z2
COMET X6 HP	single mode	45	102	232	45,5	7.320	300	250	7.320	240	250
	double mode	45	102	232	45,5	3.250	300	250	3.250	240	250

Dimensions in mm

TAPPING CAPACITY (with tap on aluminium and through hole)

With compensator

Stiff (optional)

M10

WORKPIECE LOCKING

Standard number of pneumatic vices

Maximum number of pneumatic vices

Automatic vice positioning and workpiece reference stops through independent H and P axes

AUTOMATIC TOOL MAGAZINE ON BOARD THE GANTRY

Maximum number of magazine tools

Maximum number angle machining units that can be inserted in the tool magazine

Maximum diameter of the blade that can be inserted in the magazine (mm)

Ø = 180

SAFETY DEVICES AND PROTECTIONS

Machine integral protection booth

Laminated protection glass

Retractable side protection tunnels

Included

Available

Power and flexibility of the electrospindle

7 kW S1 high torque electrospindle allows heavy duty machining. It moves along the A-axis allowing rotations from 0° to 180°, so the profile can be machined on 3 faces without being repositioned. It can be used for some types of steel extrusions as well as for aluminium profiles, thanks to the software-adjusted lubricating system. With its double tank it allows either minimum oil circulation or oil emulsion spray-mist.

CNC machining centres Comet X6 HP Power and flexibility of the electrospindle Emmegi 2

Dynamic double operation

The innovative machining mode allows minimising downtimes when loading and unloading the workpieces to be machined. The system allows, in the two distinct and independent work areas, to simultaneously carry out the loading/unloading of extruded profiles on one side, and machining of workpieces on the other, with different lengths and/or codes. This solution makes the machine very flexible, which is highly suitable for the field of window/door frames and for small work orders, where machining is required for small lots of different pieces.

HP version

Comet has two operation modes: a single work area for bars up to 7 m long, or two independent work areas in double operation mode. The machine in HP version is equipped with 2 additional axes for positioning of vices and reference stops, that allow positioning the vices while the machine is working in double mode.

CNC machining centres Comet X6 HP HP version Emmegi 2

CNC machining centres Comet X6 HP HP version Emmegi 3

Vice positioner

Vice unit positioning is performed by two numerically controlled axes, H and P, parallel to the X-axis, with on-board reference stop. This solution allows positioning stops all along the machine to work in multi-workpiece mode with one profile for every pair of vices. Furthermore, the positioning of the vices takes place independently of the operational condition of the spindle (X-axis).

Glass protection

Safe, perfect, resistant, long-lasting. These are the advantages of choosing glass for protecting the new Comet machining centres. Glass is also easy to clean and less susceptible to scratches and wear. Machine cuts operate to flag machine statuses, thanks to a light colour interface. The whole visor slides downwards, thus making it easier to load the workpieces; additionally, the ends feature aluminium guards that act as a support plane if needed.

Operator interface

The possibility of rotating the monitor on its vertical axis allows the operator to view the screen from any position. The user interface has a 24” touchscreen display in 16:9 format, portrait mode, equipped with the necessary USB connections for PC and CNC remote interfaces. It also features an operator panel, mouse, and it is set up for connecting barcode reader and remote operator panel.

Tool magazine

The tool magazine is integrated on the X axis, in the lower part and behind the electrospindle. It allows great reduction of tool change times. This function is particularly useful in the extrusion head and tail machining, avoiding the stroke to get to the magazine, as it moves simultaneously with the electrospindle and its positions. The magazine can contain up to 10 tool holders with relevant tools, which can be set at the operator’s discretion. A sensor detects correct cone positioning.

CNC machining centres Comet X6 HP Foldaway tunnel Emmegi

Foldaway tunnel (Optional)

Integrated with the machine’s aesthetics and design, thanks to the perforated sheet metal for transparency and lightness, the tunnel opens and closes as needed. As its length can be reduced when not in use, it helps save space at the workshop. The outlet for the chip conveyor belt and its engine are built into the lower section, in view of an aesthetic and functional design.

Label printer (Optional)

The industrial label printer allows each cut profile to be identified with identifying features from the cutting list. In addition, barcode printing enables easy identification of the profile itself, which is particularly useful for subsequent machining steps on Machining Centres or assisted assembly lines.

Comet X6 HP

Power and flexibility of the electrospindle

Dynamic double operation

HP version

Vice positioner

Glass protection

Operator interface

Tool magazine

Foldaway tunnel (Optional)

Label printer (Optional)

Other Products