Assembly bench for glazed sashes with work table tilting from 0° (horizontal) to 85°. The drop-away roller conveyor is adjustable in height (from 170 to 460 mm) independently from the work table. The work table is adjustable from 895 to 965 mm while the feet are drilled with holes for floor anchoring. The bench is provided with a central spider clamp for hoisting and positioning the glass.

Technical data arrow_drop_down
WORK BENCHES 
Hard anti-friction PVC contact surface
 
Pneumatic tilting of work table from 0° (horizontal) to 85°
 
DIMENSIONS 
Length (mm)
1.400
Width (mm)
1.400
Adjustable work table (horizontal position) (mm)
895 ÷ 965
Raised glass height (mm)
1.200
Weight (kg)
170
CHARACTERISTICS 
Pneumatic lifting for glass
 
Manually tilting and height-adjustable roller conveyor independently from the work bench
 
Feet with holes for ground fixing
 
Air/cycle absorption (Nl)
36
Load capacity (kg)
120
Central lifting device maximum loading capacity (kg)
70
Included       
Available
PVC contact surfaces
The anti-friction hard PVC support surface preserves the integrity of the frame by allowing it to slide.
Manual assembly benches BA 411 PVC contact surfaces Emmegi
Manual assembly benches BA 411 Pneumatic lifting for glass Emmegi
Pneumatic lifting for glass
The central, retractable crossbeam is equipped with four rubber points for glass support that can be adjusted along the axes. When the bench is in the horizontal position, the crossbeam can be raised by means of the footswitch and rotated manually. A safety system prevents lifting the crossbeam with the bench in a tilted position, or tilting the bench when the crossbeam is raised.
Adjustable feet
Height adjustable feet to ensure the work bench can be positioned at the required height and perfectly flush with the other products in the Dynamic Line. The feet also have holes so they can be anchored to the floor.
Manual assembly benches BA 411 Adjustable feet Emmegi
Manual assembly benches BA 411 Door sliding roller conveyor Emmegi
Door sliding roller conveyor
A manually-operated tilting roller conveyor with automatic locking (to 2 preset positions), allows horizontal translation of the frame, thanks to rollers (mounted on a stem) that ensure high smoothness and ease of movement along the production line.
Tilting work bench
The work bench is tilting with fully pneumatic movement. By means of the footswitch, the work surface can be tilted from 0°, horizontal position, to 85°.
Manual assembly benches BA 411 Tilting work bench Emmegi

Other Products