Twin-head cutting-off machine with 3 controlled axes with automatic movement of the mobile head and electronic management of all 45 ° (internal) to 15° (external) angles. Blades feed driven by hydro-pneumatic cylinders. 550 mm-blade. Available with a useful cut of 5 m or 6 m in length.

Technical data arrow_drop_down
MACHINE CHARACTERISTICS  
Electronic control of the X axis
 
Standard X axis positioning speed (m/min)
25
Mobile head position reading with absolute magnetic strip direct measuring system
 
Detection of cutting unit tilting through direct measurement system with absolute magnetic strip
 
Electronic control of intermediate angles
 
Maximum internal inclination
45°
Maximum external inclination
15°
Hydropneumatic blade feed
 
Effective cut, according to model (mm)
4.000 / 5.000 / 6.000
Cemented carbide blade
2
Blade diameter (mm)
550
Blade motor power (kW)
2,64
Electronic profile thickness gauge
 
CUTTING DIAGRAM 
SAFETY DEVICES AND PROTECTIONS 
Pneumatically-operated front local protection
 
LUBRICATION AND SUCTION 
Minimal oil diffusion lubrication system
 
Preparation for automatic start-up of external exhauster
 
Chip conveyor with rubber belt
 
PROFILE POSITIONING AND CLAMPING 
Pair of horizontal pneumatic vices with "low pressure" device
 
Pair of horizontal vertical vices
 
Pair of additional horizontal vices
 
Intermediate mechanical profile support
 
Roller conveyor on the mobile head with servo-controlled mechanically operated profile supports
 
Profile support roller conveyor on fixed head for profile infeed from left
 
Pneumatic reference stop on the mobile head for profile infeed from left
 
FUNCTIONS 
Perform single cuts
 
Execution of intermediate angles cuts
 
Execution of cyclical cuts from cutting lists
 
Special cut function PRO (longer, shorter, chamfered or wedge cut)
 
Semi-automatic cut function SLICE (thrust cut)
 
Bar optimisation
 
Included       
Available
Head Guards
Automatic local head protections, made of scratch-resistant polycarbonate, are operated by a pneumatic cylinder with an anti-crushing device that resets the pneumatic load to zero when closing. They are mounted on a laterally sliding system to better shelter the operator in any cutting operation.
Double-head cutting-off machines Precision TS2 Head Guards Emmegi
Double-head cutting-off machines Precision TS2 Control Emmegi
Control
The ergonomic state-of-the-art control panel features a 10.4” touchscreen display and fully customised software and is packed with functions developed in the Microsoft Windows® environment specifically for this machine. The machining cycle can be optimised by creating cutting lists, thereby reducing scrap and cycle times for workpieces loading-unloading.
Load and unload
The Precision cutting-off machine can be equipped with a roller conveyor on the mobile head, for standard feeding and unloading, or on the fixed head for feeding from the left-hand side. A pneumatic stop device on the mobile head is available to ease positioning of the profile in this loading mode.
Double-head cutting-off machines Precision TS2 Load and unload Emmegi
Double-head cutting-off machines Precision TS2 Cutting units inclination virtual axis Emmegi
Cutting units inclination virtual axis
Tilting of each head, up to 15° outward and 45° inward for both aluminium and PVC versions, is done by means of two circular guides placed on four pairs of steel casters. This patented solution makes it possible to eliminate obstructions in the cutting area, all to the benefit of profile positioning and clamping, while also offering greater rigidity than traditional systems. The absolute magnetic strip positioning system dispenses with the need for axes homing procedures, with the associated idle times.
Profile clamping
Making use of the ample space provided by the use of the virtual axis, clamping of the profile to be cut is performed by two horizontal hold-down devices with extreme precision and in absolute safely. For vertical clamping, particularly for special cuts, the machine can be equipped with a patented system of horizontal hold-down devices.
Double-head cutting-off machines Precision TS2 Profile clamping Emmegi
Double-head cutting-off machines Precision TS2 Label printer Emmegi
Label printer (Optional)

The industrial label printer allows each cut profile to be identified with identifying features from the cutting list. In addition, barcode printing enables easy identification of the profile itself, which is particularly useful for subsequent machining steps on Machining Centres or assisted assembly lines.

Other Products