Double-head cutting-off machine with 3 or 5 controlled axes for aluminium, PVC and light alloys with automatic movement of the mobile head and electronic management of all 45° (internal) to 15° (external) angles, with a precision, within each degree, of 280 positions. In the basic version blade advancement is driven by a couple of hydro-pneumatic cylinders. In version E this advancement is also managed by a couple of CN axes, to ensure optimal speed regulation and output travel of the blades. 550mm-blade Available with a useful cut of 5 m or 6 m in length.

The HS High Speed version envisions an X axis with higher speed and all necessary protections for the automatic work, even unattended, in order to obtain maximum production.

Technical data arrow_drop_down
FUNCTIONS 
Bar optimisation
 
Semi-automatic cut function SLICE (thrust cut)
 
Special cut function PRO (longer, shorter, chamfered or wedge cut)
 
Execution of cyclical cuts from cutting lists
 
Execution of intermediate angles cuts
 
Perform single cuts
 
SAFETY DEVICES AND PROTECTIONS 
Fourth side fence
 
Side protection tunnels and wall connection RH and LH fence
 
Electrically operated fully enclosed front guarding
 
Soundproofed integral protection cabin with internal lighting
 
PROFILE POSITIONING AND CLAMPING 
Optional support surface kit on fixed head + horizontal/offset vice
 
Auxiliary support surface on mobile head
 
Pneumatic reference stop on the mobile head for profile infeed from left (HS version excluded)
 
Pair of horizontal pneumatic vices with "low pressure" device
 
Pair of horizontal vertical vices
 
Additional vice for profile support on fixed head roller conveyor (HS version excluded)
 
Additional vice for profile support on mobile head roller conveyor
 
Profile support roller conveyor on fixed head for profile infeed from left (HS version excluded)
 
Roller conveyor on the mobile head with servo-controlled pneumatically operated profile supports
 
Intermediate pneumatic profile support
 
DIGICLAMP - digital vices supervision and positioning control system
 
Manual vices position adjustment on graphic interface
 
Pair of additional horizontal vices
 
Pair of horizontal offset vices for cut <45°
 
LUBRICATION AND SUCTION 
Chip conveyor with rubber belt
 
Preparation for automatic start-up of external exhauster
 
Minimal oil diffusion lubrication system
 
MACHINE CHARACTERISTICS  
Maximum internal inclination
45°
Electronic control of intermediate angles
 
Detection of cutting unit tilting through direct measurement system with absolute magnetic strip
 
Mobile head position reading with absolute magnetic strip direct measuring system
 
Standard X axis positioning speed (m/min)
25
Electronic control of the X axis
 
Maximum external inclination
15°
Electronic profile thickness gauge
 
Blade motor power (kW)
2.64
Blade diameter (mm)
550
Cemented carbide blade
2
Minimum cut with PRO software with 2 heads at 45° internal (mm)
364
Minimum cut with PRO software with 2 heads at 90° (mm)
260
Standard minimum cut with 2 heads at 45° internally (mm)
772
Standard minimum cut with 2 heads at 90° (mm)
370
Effective cut, according to model (mm)
5.000 / 6.000
Hydropneumatic blade feed
 
CUTTING DIAGRAM 
Included       
Avayable
Label printer

The industrial label printer allows each cut profile to be identified with identifying features from the cutting list. In addition, barcode printing enables easy identification of the profile itself, which is particularly useful for subsequent machining steps on Machining Centres or assisted assembly lines.

Double-head cutting-off machines Precision T2 Label printer Emmegi
Double-head cutting-off machines Precision T2 Cutting units inclination virtual axis Emmegi
Cutting units inclination virtual axis
Inclination of each head of up to 15° outwards is provided by two circular guides mounted on four pairs of steel rollers. This patented solution makes it possible to eliminate obstructions in the cutting area, all to the benefit of profile positioning and clamping, while also offering greater rigidity than traditional systems. The absolute magnetic strip positioning system dispenses with the need for axes homing procedures, with the associated idle times.
Profile clamping
Making use of the ample space provided by the use of the virtual axis, clamping of the profile to be cut is performed by two horizontal hold-down devices with extreme precision and in absolute safely. For vertical clamping, particularly for special cuts, the machine can be equipped with a patented system of horizontal hold-down devices.
Double-head cutting-off machines Precision T2 Profile clamping Emmegi
Double-head cutting-off machines Precision T2 Control Emmegi
Control
The ergonomic state-of-the-art control panel features a 10.4” touchscreen display and fully customised software and is packed with functions developed in the Microsoft Windows® environment specifically for this machine. The machining cycle can be optimised by creating cutting lists, thereby reducing scrap and cycle times for workpieces loading-unloading.
Load and unload
The Precision cutting-off machine can be equipped with a roller conveyor on the mobile head, for standard feeding and unloading, or on the fixed head for feeding from the left-hand side. A pneumatic stop device on the mobile head is available to ease positioning of the profile in this loading mode.
Double-head cutting-off machines Precision T2 Load and unload Emmegi

Other Products