Electronic double-head cutting-off machine with 5 axes for compound cuts. Motorised and electronically controlled rotation of the horizontal axis (22°30’ external and 45° internal) and the vertical axis (45° internal). 500 mm-blade Available with a useful cut of 4, 5, 6 m in length.

Technical data arrow_drop_down
SOFTWARE 
Microsoft® Windows® Embedded
\
MACHINE CHARACTERISTICS  
Cutting capacity (mm)
4.000 / 5.000 / 6.000
Mobile head position reading with magnetic strip direct measuring system
 
Electronic control of intermediate angles
 
Cemented carbide blade
2
Blade motor power (kW)
2.2
Cutting area pneumatically-controlled integral protection
 
Pair of horizontal and vertical pneumatic vices with "low pressure" device
 
Vertical clamping system with horizontal vice
 
Profile support roller conveyor
 
Minimal oil diffusion lubrication system
 
Manual profile support
 
Pre-setting for automatic exhauster start
 
Metric ruler
 
COMMAND FEATURES 
12" TFT graphic colour display
 
1 GB DOMM memory
 
Mouse integrated in the keyboard
 
Preparation for label printer connection
 
Label printer with a speed of 150 mm/sec
 
Label printer with peeling device with a speed of 150 mm/sec
 
Presetting for connection with remote PC via USB, network or serial (depending on version)
 
Execution of cyclic cuts from cutting lists and macros
 
Perform single cuts
 
Storage of 500 profile corrective values with measurement automatic calculation for angled cuts
 
Storage of 500 cutting lists (1,000 rows each) from keyboard
 
Bar optimisation
 
"Windows XPE" compatible industrial computer
 
CUTTING DIAGRAM 
Included       
Avayable
Label printer

The industrial label printer allows each cut profile to be identified with identifying features from the cutting list. In addition, barcode printing enables easy identification of the profile itself, which is particularly useful for subsequent machining steps on Machining Centres or assisted assembly lines.

Double-head cutting-off machines Combi 5 Assi Star Label printer Emmegi
Double-head cutting-off machines Combi 5 Assi Star Intermediate support Emmegi
Intermediate support

The pneumatic intermediate support is extremely useful when cutting light profiles of considerable lengths. In this case, the pneumatic support will, automatically, provide the ideal condition to support the profile. This accessory is available for all lengths, but is specifically recommended on machines having 5- and 6-meter useful cuts.

Vertical vices

Safe and precise clamping of the profile to be cut is facilitated by the use of pneumatic vices, equipped with a low-pressure device to prevent accidental crushing. To facilitate the width and height adjustment of individual cylinders, each vice assembly is equipped with practical and quick lever handles.

Double-head cutting-off machines Combi 5 Assi Star Vertical vices Emmegi
Double-head cutting-off machines Combi 5 Assi Star Mobile heads tilting Emmegi
Mobile heads tilting
Servomotors with encoders provide for the rotation of the heads around the horizontal axis, and the relevant positioning is electronically managed and parameterised by the control. Rotation around the vertical axis is by pneumatic cylinders. Mobile units are equipped with integral pneumatic drop-down protections of the machining area.
Control
The control installed on the various models, designed for ease of use and sliding on bearings, allows correct positioning of the moving heads according to the specifications of the cut to be made. The machining cycle can be optimised by creating cutting lists, thereby reducing scrap and cycle times for workpieces loading-unloading.
Double-head cutting-off machines Combi 5 Assi Star Control Emmegi

Other Products