Vegamatic

A semiautomatic version cutting centre with 2 controlled axes, manual loading/unloading on opposite sides of the machine, with front CNC blade, dedicated to cutting Aluminium and PVC profiles and light alloys in general. It performs predefined and optimised cutting lists in automatic. Designed to execute cutting at angles ranging from 45° to 135° or from 22°30' to 157°30'

Technical data arrow_drop_down
AXIS STROKES 
B AXIS (angle of blade) (according to version)
45° ÷ 135° ; 22°30’ ÷ 157°30’
U AXIS (feeder) (mm)
7500
CUTTING UNIT 
Blade diameter at carbide-tipped (mm)
Ø = 550
Hydro-pneumatic blade feed
 
Pre-set for swarf exhauster
 
Minimal oil diffusion lubrication system
 
Power rating (kW), “three-phase” blade drive motor
3
LOADING UNIT: PROFILE POSITIONING 
Max. loadable profile length (mm)
7200
Loading feeder with 2 controlled axes for workpieces of up to 7,500 mm with collet
 
Workpiece tilting device to 90° during loading
 
Minimum machinable profile section (mm)
30 x 30
Infeed roller conveyor
 
Max. loadable profile width (mm)
190
SAFETY DEVICES AND PROTECTIONS 
Metal enclosure guard on three sides
 
Cutting area pneumatically-controlled integral protection
 
WORKPIECE LOCKING 
Additional horizontal vice
 
Pair of horizontal pneumatic vices with pressure reducer plus pressure gauge
 
Vice pressure reduction with pressure gauge
 
Additional vertical vice
 
Vertical pneumatic vices
3
ACCESSORIES  
Vertical drilling unit
 
Horizontal drilling unit
 
Preparation for label printer connection
 
Label printer with a speed of 150 mm/sec
 
Label printer with peeling device with a speed of 150 mm/sec
 
COMMAND AND CONTROL UNIT 
Pneumatic panel
 
Ventilated electrical cabinet
 
CNC-PC with Intel® processor
 
12" LCD-TFT graphic colour screen
 
Keyboard
 
256 Mb RAM memory
 
CUTTING DIAGRAM 
Included       
Avayable
Bar feeder
The extremely fast and precise CNC numerical control system for bar positioning includes a gripper for clamping the profile and the possibility to manually adjust the position. The movement is transmitted on a rack through a low backlash gearbox to maintain the high standards of precision guaranteed by the CNC. The feeder slides on case-hardened and tempered bars through linear bushings.
Vegamatic Bar feeder Emmegi
Vegamatic Label printer Emmegi
Label printer

The industrial label printer allows each cut profile to be identified with identifying features from the cutting list. In addition, barcode printing enables easy identification of the profile itself, which is particularly useful for subsequent machining steps on Machining Centres or assisted assembly lines.

Cutting module
The cutting module consists of a single-head cutting off machine with hydro-pneumatic blade feed. It is provided with a 550 mm blade featuring wide cutting range: from 45° to 135° (from 22°30’ to 157°30’ optional). Setting of the cutting angles is fully automatic and is handled by the CNC.
Vegamatic Cutting module Emmegi
Vegamatic Control Emmegi
Control
The operator interface with colour LCD screen is equipped with network connection and USB ports. It also features a built-in control panel, keyboard and mouse. Possibility to install the label printer. The control is managed by the Windows operating system under which the Job and Blade software packages are installed: Job is designed for the job editor and optimizing cutting lists; Blade, installed alongside Job, controls the machine’s operations and manages the machining processes.
Profile offset
Vegamatic features an automatic profile offset device, which allows the profiles to be detached from the references during translation, so as to prevent damage or scoring of the profiles.
Vegamatic Profile offset Emmegi
Vegamatic Loading/unloading roller conveyor Emmegi
Loading/unloading roller conveyor
Vegamatic loads and unloads the profiles on the right roller conveyor with a great advantage for operational convenience: the feeder retrieves the bar directly from the loading/unloading roller conveyor by overtaking the cutting module and moves it overhead to the left roller conveyor. At this point it begins to perform machining, returning the finished parts directly to the loading/unloading roller conveyor. The rollers are covered with PVC.

Other Products