Precision  T2 E-HS

Double-head cutting-off machine with 5 controlled axes for aluminium, PVC and light alloys with automatic movement of the mobile head and electronic management of all 45° (internal) to 15° (external) angles, with a precision, within each degree, of 280 positions. In the basic version blade advancement is driven by a couple of hydro-pneumatic cylinders. In version E this advancement is also managed by a couple of CN axes, to ensure optimal speed regulation and output travel of the blades. 550mm-blade Available with a useful cut of 5 m or 6 m in length. The HS High Speed version envisions an X axis with higher speed and all necessary protections for the automatic work, even unattended, in order to obtain maximum production.

Technical data arrow_drop_down
MACHINE CHARACTERISTICS  
Electronic control of the X axis
 
HS version X axis positioning speed (standard) (m/min)
35
Detection of cutting unit tilting through direct measurement system with absolute magnetic strip
 
Mobile head position reading with absolute magnetic strip direct measuring system
 
HS version X axis positioning speed (optional) (m/min)
50
Electronic control of intermediate angles
 
Maximum internal inclination
45°
Maximum external inclination
15°
Hydropneumatic blade feed
 
CN electronic axis of the blade feed (E version)
 
Effective cut, according to model (mm)
5.000 / 6.000
Cemented carbide blade
2
Blade diameter (mm)
550
Blade motor power (kW)
2,64
Electronic profile thickness gauge
 
CUTTING DIAGRAM 
SAFETY DEVICES AND PROTECTIONS 
Electrically operated fully enclosed front guarding
 
Side protection tunnels and wall connection RH and LH fence
 
Enclosure guard of the 4th (rear) side
 
Soundproofed integral protection cabin with internal lighting
 
PROFILE POSITIONING AND CLAMPING 
Pair of horizontal pneumatic vices with "low pressure" device
 
Pair of horizontal vertical vices
 
Pair of additional horizontal vices
 
Intermediate pneumatic profile support
 
Roller conveyor on the mobile head with servo-controlled pneumatically operated profile supports
 
Additional vice for profile support on mobile head roller conveyor
 
Conveyor belt for step-by-step or automatic cut (HS version only)
 
FUNCTIONS 
Perform single cuts
 
Execution of intermediate angles cuts
 
Execution of cyclical cuts from cutting lists
 
Bar optimisation
 
Included       
Available
Control
The ergonomic state-of-the-art control panel features a 10.4” touchscreen display and fully customised software and is packed with functions developed in the Microsoft Windows® environment specifically for this machine. The machining cycle can be optimised by creating cutting lists, thereby reducing scrap and cycle times for workpieces loading-unloading.
Products for Aluminium Precision T2 E-HS Control Emmegi
Products for Aluminium Precision T2 E-HS Load and unload Emmegi
Load and unload
The Precision cutting-off machine can be equipped with a roller conveyor on the mobile head, for standard feeding and unloading, or on the fixed head for feeding from the left-hand side. A pneumatic stop device on the mobile head is available to ease positioning of the profile in this loading mode.
Cutting units inclination virtual axis

Inclination of each head of up to 15° outwards is provided by two circular guides mounted on four pairs of steel rollers. This patented solution makes it possible to eliminate obstructions in the cutting area, all to the benefit of profile positioning and clamping, while also offering greater rigidity than traditional systems. The absolute magnetic strip positioning system dispenses with the need for axes homing procedures, with the associated idle times.

Products for Aluminium Precision T2 E-HS Cutting units inclination virtual axis Emmegi
Products for Aluminium Precision T2 E-HS Profile clamping Emmegi
Profile clamping
Making use of the ample space provided by the use of the virtual axis, clamping of the profile to be cut is performed by two horizontal hold-down devices with extreme precision and in absolute safely. For vertical clamping, particularly for special cuts, the machine can be equipped with a patented system of horizontal hold-down devices.
HS – High Speed
The HS – High Speed version is equipped with a faster X axis (mobile head positioning), and features an integral protection on the sides and at the back, to operate in complete safety, increasing productivity. The safety characteristics of this version, fully inaccessible during operation, allow using automatic cutting cycles, even not supervised, at maximum operational performance.
Products for Aluminium Precision T2 E-HS HS – High Speed Emmegi
Products for Aluminium Precision T2 E-HS Label printer Emmegi
Label printer (Optional)

The industrial label printer allows each cut profile to be identified with identifying features from the cutting list. In addition, barcode printing enables easy identification of the profile itself, which is particularly useful for subsequent machining steps on Machining Centres or assisted assembly lines.

Other Products